
The Fluke 419D laser distance meter extends your reach up to 80 m (260 ft) with even greater accuracy. It saves you time and reduces errors with enhanced features like storage for 20 complete displays and a tripod mode for stable, long-distance measurements.
Distance Measurement | |
Typical measuring tolerance1 | ±1.0 mm 3 |
Maximum measuring tolerance2 | ±2.0 mm 3 |
Range at Leica Target Plate GZM26 | 80 m / 260 ft |
Typical range1 | 80 m / 260 ft |
Range at unfavorable condition4 | 60 m / 195 ft |
Smallest unit displayed | 6 / 30 / 60 mm (10 / 50 / 100 m) |
Ø Laser point at distances | 6 / 30 / 60 mm (10 / 50 / 100 m) |
Tilt measurement | |
Measuring tolerance to laser beam5 | No |
Measuring tolerance to housing5 | No |
Range | No |
General | |
Laser class | 2 |
Laser type | 635 nm, < 1 mW |
Protection class | IP54 |
Automatic laser off | After 90 seconds |
Automatic power off | After 180 seconds |
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 | Up to 5,000 measurements |
Size (L x W x D) | 127 x 56 x 33 mm |
Weight (with batteries) | 153 g |
Temperature range Storage operation | -25°C to +70°C (-13°F to +158°F) -10°C to +50°C (14°F to +122°F) |
Calibration cycle | Not applicable |
Maximum altitude | 3000 m |
Maximum relative humidity | 85% at 20°F to 120°F (-7°C to 50°C) |
Safety | IEC Standard No. 61010-1:2001 EN60825-1:2007 (Class II) |
EMC | EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010 |
2. 2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C.
3.Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux.
5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.
- Measure up to 80 m (260 ft)
- Higher accuracy: ±1 mm (0.04 in)
- View more data with backlit, three-line display
- Full Pythagoras function for height measurements
- Storage of 20 complete displays for quick recall
- Audible keypad feedback
- Minimum/Maximum function
- Tripod mode for mounting meter on a tripod when measuring long distances
- Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
- Automated End-piece Correction for measuring from an edge or corner – a built-in sensor detects the position of this bracket and automatically changes the reference point
- Enhanced environmental protection: IP54-rated as dust and water spray resistant
- Improved battery life of 5000 measurements with auto laser off and auto power off features
- Bright laser for easy targeting
- Quick calculations of area (square feet/meters) and volume
- Easy-to-use addition and subtraction function
- Carrying pouch secures to tool belt
- Reduction of estimation errors, saving both time and money
- The most advanced 2 laser technology for distance measurement
- Instant measurement with one-button operation
- Easy addition and subtraction function
- Quick calculation of area (square footage) and volume
- Easy addition and subtraction of measurements
- Minimum/maximum function
- Improved battery life from automatic shut-off feature
- Pythagoras calculation for determining distance indirectly from two other measurements
- Pouch with Fluke logo
- Three-year warranty
- Improved visibility with backlit screen
- Ability to measure up to 80 m (260 ft) for 419D
- Tripod mode allows you to mount to a tripod for measuring long distances
- Stake out function
- Enhanced Pythagoras calculation for determining distance indirectly from three other measurements
- Audible keypad feedback
- Storage of the last twenty measurements for quick recall of distance
- Strong environmental protection with IP54 (water spray and dust proof) sealing
Comments are closed.