
TCP0030A is a high-performance, easy-to-use AC/DC current probe designed for use and direct connection to oscilloscopes with the TekVPI™ probe interface. This AC/DC current measurement probe provides greater than 120 MHz of bandwidth with selectable 5 A and 30 A measurement ranges. It also provides exceptional low-current measurement capability and accuracy to current levels as low as 1 mA, important for meeting today’s challenging current measurement needs.
Specification | |
Bandwidth | DC to ≥120 MHz |
Rise time | ≤2.92 ns |
Maximum DC current | 30 A |
Maximum RMS current | 30 A |
Maximum peak pulse current | 50 A |
Maximum bare wire voltage | 150 V CAT II, (insulated wire 300 V CAT II) |
Sensitivity | 1 mA (on oscilloscopes that support 1 mV/div setting) |
DC accuracy | ±3% warranted |
Accuracy, typical | DC: ±1% of reading DC to 60 Hz, ≤5 A: ±1% 60 Hz – 5 kHz, ≤5 A: ±1.5% DC – 5 kHz, >5 A: ±1.5% |
Maximum Amp-Second product | 500 A*µs (in 30 A range) |
Insertion impedance | 1 mΩ at 10 kHz 3.5 mΩ at 100 kHz 0.08 Ω at 1 MHz 0.15 mΩ at 10 MHz 0.7 Ω at 100 MHz 0.85 Ω at 120 MHz |
Signal delay | 14.5 ns |
Current ranges | 5 A and 30 A |
- Easy-to-use and accurate AC/DC current measurements
- Intelligent communication with TekVPI™ oscilloscopes provides:
- Units scaling and readout. Automatic, on-screen readout of amps and magnitude. Manual setup is not required. Hand calculation from volts to amps is unnecessary
- Push button degauss and Autozero functionality
- Probe status and diagnostic indicator LEDs
- Remote GPIB/USB probe control
- Split-core construction allows easy circuit connection
- High accuracy with typically less than 1% DC gain error
- Low noise and DC drift
- 3rd party safety certification
Comments are closed.