
TIGHTNESS TESTING OF ALL CHIMNEY CLASSES AND FLUE GAS SYSTEMS
The Wöhler DP 600 checks the tightness of exhaust ducts and chimneys. The menu enables the user to select between the different installation types. The Wöhler DP 600 regulates automatically the pressure which is necessary for the flue gas systems type P1 (exhaust ducts), H1 (combined heat and power plants, exhaust ducts with high pressure), N1 and N2 (chimneys) and determines the leakage rate automatically.
It also disposes of a variable mode which allows the user to select the test pressure and the leakage rate. This way, tightness tests of ventilation systems or flue gas systems type P2 or H2 are also possible. A thermal fast printer can print all results.
Technical Data | |||||
Pressure | Range | ±7.000 Pa | |||
Resolution | 0,1 Pa from 0…900 Pa 1 Pa from 900 Pa | ||||
Accuracy | ±0,5 Pa, ±2,5 % f.m. | ||||
Volume flow without adapter | Range | 0…200 Nm³/h | |||
Resolution | 0,1 Nm³/h | ||||
Accuracy | ±2,5 Nm³/h, ±5 % f.m | ||||
Volume flow with adapter 3,0 | Range | 0…10 Nm³/h | |||
Resolution | 0,01 Nm³/h | ||||
Accuracy | ±0,05 Nm³/h, ±5 % f.m | ||||
Volume flow with adapter 0,3 | Range | 0,10…18 NL/min | |||
Resolution | 0,01 NL/min | ||||
Accuracy | ±0,05 NL/min, ±5 % f.m | ||||
General information | Power Supply | 110…230 V, 50…60 Hz | |||
Size | 33 x 36 x 15 cm | ||||
Weight | 9,2 kg |
- Tightness testing with lea kage rates up to 200.00 m³/h
- Tightness testing of all chimney classes and flue gas systems
- Tightness testing of flue gas systems of combined heat and power plants
- Confirmation of a sufficient combustion air supply according to TRGI sheet G 625 (simple and detailed procedure)
- Stove tightness testing
- Tightness testing is also possible with negative pressure
Comments are closed.